Picture |
Heading |
Updated |
 |
EPTFE Black Strip for Electronic Product
ePTFE Auto Film is defined as: after two-way stretch forming process, change the pore aperture size to assess the level of waterproof and breathable (IP65 IP67), and with PET two-component non-woven and PP spun-bonded non-woven base material thermal compo |
2017-12-29 |
 |
EPTFE Middle Bubble Point Membrane for PP Spunlaced Non-woven Fabrics PP Spunbond Non-woven Fabrics
ePTFE middle bubble point Specification Code:SNZP-M-02 thickness:30-40um Width:260-1600mm Length:100-300m Pore size:0.45um Bubble point:0.08-0.12mpa (Differential pressure 0.2mpa) Flow rate:4-6s/100ml/m2 PH :0-14 Material and Application Field |
2017-12-25 |
 |
EPTFE Membrane for Aramid Fiber Needled Feltor PTFE feltor Glass Fiber Needle Felt
Sano e-PTFE air removing membrane filter material used needle felt,spunlace mat or woven which is produced by the well-known brand as a carrier. It uses the international leading composite technology (high-temperature compound, normal-temperature compound |
2017-12-25 |
 |
EPTFE Over Height Bubble Point Membrane for PP Spunlaced Non-woven Fabrics PP Spunbond Non-woven Fab
ePTFE over height bubble point Specification Code:SNCGP-M-04 thickness:50-60um Width:260-1600mm Length:100-200m Pore size:0.1um Bubble point:0.25-0.3mpa (Differential pressure 0.2mpa) Flow rate:18-35s/100ml/m2 PH :0-14 Material and Application Field |
2017-12-20 |
 |
EPTFE Membrane for High Temperature in Glass Scrim Basalt Woven Fabric
Sano e-PTFE air removing membrane filter material used needle felt,spunlace mat or woven which is produced by the well-known brand as a carrier. It uses the international leading composite technology (high-temperature compound, normal-temperature compound |
2017-12-18 |
 |
EPTFE 0.2um for PET Two-component Non-woven Fabrics PP Needled Felt PP Woven Scrim PP Spunbond Non-w
ePTFE Auto Film is defined as: after two-way stretch forming process, change the pore aperture size to assess the level of waterproof and breathable (IP65 IP67), and with PET two-component non-woven and PP spun-bonded non-woven base material thermal compo |
2017-12-10 |
 |
SANO-TEX Waterproof EPTFE Membrane for Police Clothing and Special Clothing
Sano ePTFE clothing film uses special technology to make the ePTFE micronized resin to be tiny film pores whose diameter is between 100-500 nano, and every square centimeter has 90 billions tiny pores(Microscope at a magnification of 5000times). The pore |
2017-12-05 |
 |
EPTFE H13 for PET Polyester Non-woven Fabrics PET Spunlaced Non-woven Fabrics PET Spunbond Non-woven
Sano e-PTFE air purification membrane filter material uses the hot-rolled non-woven which is the well-known brand, after the surface treatment technology process, such as singeing, calendaring, waterproof, oil repellent, flame retardant, then uses the adv |
2017-12-01 |